- Landline -01908 991096
- Mobile -07793 053282
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
- Landline -01908 991096
- Mobile -07793 053282
Buy BS 4800 - 10 A 03 Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.
Product Name: British Standard 4800 - 10 A 03 Aerosol Spray Paint
Manufacturer: One Stop Aerosols
Product Code: BS45159
Price: £7.99 – £69.99
Availability:In Stock
RGB Colour Code: 201-199-191
Hexadecimal Colour Code: #C9C7BF
30-day returns policy on all eligible faulty products. Read more about our returns policy.
BS 4800 - 10 A 03 Aerosol Spray Paint is one of the colours from the BS 4800 Aerosol Spray Paint Colour Chart and is available in Cellulose, Acrylic and Synthetic Enamel aerosol systems.
All our paints are custom mixed using premium Lechler binders and colourants for a consistent, long-lasting finish.
BS 4800 - 10 A 03 Aerosol Spray Paint can be supplied as 400ml aerosols (1K or 2K with built-in hardener), litre tins, and touch-up pots or pens.
Choose your gloss level from Matt (0%) through to Full Gloss (90%).
Optional additives include UV protection and high-resistance packages for tougher environments.
Our aerosols feature a vari-nozzle for wide/narrow patterns, HVLP-style atomisation, minimal overspray and stable pressure.
Please note: 2K aerosols are supplied as Acrylic Enamel only.
Cause: Contamination, glossy or un-keyed surface, wrong or no primer, moisture on the substrate.
Fix: Strip loose areas, degrease, abrade to a uniform key, and re-prime with a substrate-appropriate primer.
Prevent: Always degrease first, then abrade. Match primer to substrate, and respect drying times before topcoat.
Cause: Heavy passes, too far or too close spraying distance, low temp, poor flow, or insufficient flash-off.
Fix: After cure, denib and flat with fine abrasive, then recoat with lighter, even passes.
Prevent: Keep a steady distance, warm the can, apply light coats, and allow proper flash-off between coats.
Cause: Spraying too far away, fast pass speed, high airflow, or low temperature causing solvent to flash in the air.
Fix: Lightly denib, then apply a wetter pass at the correct distance and speed.
Prevent: Maintain consistent distance, overlap passes by one third, and avoid windy or very cold conditions.
Cause: Silicone, oil or wax contamination that repels the coating.
Fix: Stop, allow to dry, sand out affected areas, deep clean with a suitable degreaser, then re-prime and recoat.
Prevent: Keep the work area silicone free. Avoid furniture polishes and low-grade masking tapes that shed residue.
Cause: Uneven film build, inconsistent overlap, or recoating outside the recommended window.
Fix: After cure, lightly key the surface and apply one or two uniform coats within the specified recoat window.
Prevent: Use consistent pass speed and overlap, and let each coat flash-off before the next.
Cause: Excessive film per pass or lingering too long in one area.
Fix: Allow full cure, nib the defect level with fine abrasive, then recoat with lighter passes.
Prevent: Apply multiple light coats, keep the gun or can moving, and avoid trying to achieve full coverage in one pass.
Cause: Recoating too soon or too late, solvent attacking a sensitive base, or incompatible layers.
Fix: Allow to dry fully, sand back to a stable layer, apply a compatible primer, then recoat within the advised window.
Prevent: Observe recoat times, test compatibility on a small area, and avoid heavy wet coats over uncured layers.
Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.