- Landline -01908 991096
- Mobile -07793 053282
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
- Landline -01908 991096
- Mobile -07793 053282
Buy BS 4800 - 10 B 15 Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.
Product Name: British Standard 4800 - 10 B 15 Aerosol Spray Paint
Manufacturer: One Stop Aerosols
Product Code: BS45162
Price: £7.99 – £69.99
Availability:In Stock
RGB Colour Code: 241-233-215
Hexadecimal Colour Code: #F1E9D7
30-day returns policy on all eligible faulty products. Read more about our returns policy.
BS 4800 - 10 B 15 Aerosol Spray Paint is part of the BS 4800 Aerosol Spray Paint Colour Chart. We mix every order from fresh using quality Lechler binders and colourants, so the shade you choose stays consistent across aerosols and tins.
The Lechler-based system provides excellent flow, adhesion and long-term colour stability across a wide range of substrates (use the correct primer where needed).
Tip: Not sure which paint type or gloss to choose? Tap the info buttons next to Size, Paint Type and Gloss Level, or send us a message. For a quicker reply, WhatsApp us here .
Please note: 2K aerosols are supplied in Acrylic Enamel only.
No stress. This is usually down to a little residue, a glossy surface or the wrong primer.
Quick fix: Remove any loose paint, give it a good degrease, then lightly sand for a nice even key. Apply a suitable primer and recoat.
Good to know: Degrease first, then sand. It makes a real difference to adhesion.
Happens to the best of us. It can come from heavy coats, spraying too close or not enough flash-off time.
Quick fix: Once cured, lightly denib, then recoat with lighter, even passes.
Pro tip: Keep a steady distance, warm the can a little and allow each coat to flash off before the next.
Likely yes. Usually from spraying too far away or moving too quickly.
Quick fix: Lightly denib, then apply a slightly wetter coat at a consistent distance.
Pro tip: Overlap passes by about one third and avoid very cold or windy conditions.
Usually contamination. Things like silicone, oils or wax can repel the coating.
Quick fix: Let it dry, sand out the marks, clean thoroughly with a proper degreaser, then re-prime and recoat.
Pro tip: Keep sprays and polishes with silicone away from the work area and use quality masking tapes.
Easy fix. Patchy sheen is often uneven film build or recoating outside the window.
Quick fix: After cure, lightly key the surface and apply one or two uniform coats within the recommended recoat time.
Pro tip: Keep your pass speed steady and your overlap consistent for a lovely even finish.
Yes you can. Runs happen when too much paint lands at once.
Quick fix: Let it cure fully, nib the run flat with fine abrasive, then recoat with lighter passes.
Pro tip: Multiple light coats beat one heavy coat every time.
It happens. Usually recoating too soon or too late, or layers that are not compatible.
Quick fix: Let it dry hard, sand back to a stable layer, apply a compatible primer, then recoat within the advised window.
Pro tip: Always check the recoat timings on the guidance and test a small area if you are unsure.
Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.