- Landline -01908 991096
- Mobile -07793 053282
- Landline -01908 991096
- Mobile -07793 053282
Buy British Standard 5252 10 D 43 aerosol spray paint in 400 ml rattle cans, litre tins, tester pots and touch-up pens colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.
| Format | Size | Coverage | Price |
|---|---|---|---|
| Aerosol Cans | |||
| 1K | 400 ml | 1.5 m2 | £12.99 |
| 2K | 400 ml | 1.5 m2 | £19.99 |
| 2K Air Dry | 400 ml | 1.5 m2 | £15.99 |
| Tins | |||
| 1K | 1 litre | 10 m2 | £39.99 |
| 1K | 2 litres | 20 m2 | £59.99 |
| 2K Air Dry | 1 litre | 10 m2 | £44.99 |
| 2K Air Dry | 2 litres | 20 m2 | £69.99 |
| Tester Pots | |||
| 1K | 60 ml | 0.5 m2 | £7.99 |
| 2K Air Dry | 60 ml | 0.5 m2 | £9.99 |
| 1K | 100 ml | 1 m2 | £9.99 |
| 2K Air Dry | 100 ml | 1 m2 | £11.99 |
| 1K | 250 ml | 2.5 m2 | £14.99 |
| 2K Air Dry | 250 ml | 2.5 m2 | £16.99 |
| Touch up Pens | |||
| 1K | 20 ml | 0.25 m2 | £7.99 |
| 2K Air Dry | 20 ml | 0.25 m2 | £9.99 |
Colour: British Standard 5252 10 D 43
Product type: Custom mixed paint
Brand: One Stop Aerosols
Product Code: 5557
Price: £7.99 – £69.99 + VAT
Availability: In Stock
RGB Colour Code: 196-163-54
Hexadecimal Colour Code: #C4A336
30-day returns policy on all eligible faulty products.
Meet British Standard 5252 10 D 43 from the British Standard BS 5252 Paint colour chart, mixed fresh to order for reliable colour match across every format.
What you can choose:
Using Lechler binders and colourants helps achieve consistent flow, film build and colour stability on properly prepared surfaces (pair with the right primer).
Quick guidance: A single 400ml aerosol typically covers up to about 2 m² per coat. Most colours look best with 2 to 4 light coats, depending on the surface and the shade you are covering.
Still deciding? See the info icons next to the selectors, or get in touch or message us on WhatsApp.
Please note: 2K aerosols are supplied in acrylic enamel only.
Cause: Contamination, glossy or un-keyed surface, wrong or no primer, moisture on the substrate.
Fix: Strip loose areas, degrease, abrade to a uniform key, and re-prime with a substrate-appropriate primer.
Prevent: Always degrease first, then abrade. Match primer to substrate, and respect drying times before topcoat.
Cause: Heavy passes, too far or too close spraying distance, low temp, poor flow, or insufficient flash-off.
Fix: After cure, denib and flat with fine abrasive, then recoat with lighter, even passes.
Prevent: Keep a steady distance, warm the can, apply light coats, and allow proper flash-off between coats.
Cause: Spraying too far away, fast pass speed, high airflow, or low temperature causing solvent to flash in the air.
Fix: Lightly denib, then apply a wetter pass at the correct distance and speed.
Prevent: Maintain consistent distance, overlap passes by one third, and avoid windy or very cold conditions.
Cause: Silicone, oil or wax contamination that repels the coating.
Fix: Stop, allow to dry, sand out affected areas, deep clean with a suitable degreaser, then re-prime and recoat.
Prevent: Keep the work area silicone free. Avoid furniture polishes and low-grade masking tapes that shed residue.
Cause: Uneven film build, inconsistent overlap, or recoating outside the recommended window.
Fix: After cure, lightly key the surface and apply one or two uniform coats within the specified recoat window.
Prevent: Use consistent pass speed and overlap, and let each coat flash-off before the next.
Cause: Excessive film per pass or lingering too long in one area.
Fix: Allow full cure, nib the defect level with fine abrasive, then recoat with lighter passes.
Prevent: Apply multiple light coats, keep the gun or can moving, and avoid trying to achieve full coverage in one pass.
Cause: Recoating too soon or too late, solvent attacking a sensitive base, or incompatible layers.
Fix: Allow to dry fully, sand back to a stable layer, apply a compatible primer, then recoat within the advised window.
Prevent: Observe recoat times, test compatibility on a small area, and avoid heavy wet coats over uncured layers.
Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.
