- Landline -01908 991096
- Mobile -07793 053282
- Landline -01908 991096
- Mobile -07793 053282
Buy Dulux Trade 17BG 36/333 - Javan Dawn 1 aerosol spray paint in 400 ml rattle cans, colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.
| Format | Size | Coverage | Price |
|---|---|---|---|
| Aerosol Cans | |||
| 1K | 400 ml | 1.5 m2 | £12.99 |
| 2K | 400 ml | 1.5 m2 | £19.99 |
| 2K Air Dry | 400 ml | 1.5 m2 | £15.99 |
Colour: Dulux Trade 17Bg 36/333 - Javan Dawn 1
Product type: Custom mixed paint
Brand: One Stop Aerosols
Product Code: 1226285
Price: £7.99 – £69.99 + VAT
Availability: In Stock
RGB Colour Code: 69-177-191
Hexadecimal Colour Code: #45B1BF
30-day returns policy on all eligible faulty products.
Meet Dulux Trade 17BG 36/333 - Javan Dawn 1 from the Dulux Trade Paint colour chart, mixed fresh to order for reliable colour match across every format.
What you can choose:
Using Lechler binders and colourants helps achieve consistent flow, film build and colour stability on properly prepared surfaces (pair with the right primer).
Quick guidance: A single 400ml aerosol typically covers up to about 2 m² per coat. Most colours look best with 2 to 4 light coats, depending on the surface and the shade you are covering.
Still deciding? See the info icons next to the selectors, or get in touch or message us on WhatsApp.
Please note: 2K aerosols are supplied in acrylic enamel only.
No stress. This is usually down to a little residue, a glossy surface or the wrong primer.
Quick fix: Remove any loose paint, give it a good degrease, then lightly sand for a nice even key. Apply a suitable primer and recoat.
Good to know: Degrease first, then sand. It makes a real difference to adhesion.
Happens to the best of us. It can come from heavy coats, spraying too close or not enough flash-off time.
Quick fix: Once cured, lightly denib, then recoat with lighter, even passes.
Pro tip: Keep a steady distance, warm the can a little and allow each coat to flash off before the next.
Likely yes. Usually from spraying too far away or moving too quickly.
Quick fix: Lightly denib, then apply a slightly wetter coat at a consistent distance.
Pro tip: Overlap passes by about one third and avoid very cold or windy conditions.
Usually contamination. Things like silicone, oils or wax can repel the coating.
Quick fix: Let it dry, sand out the marks, clean thoroughly with a proper degreaser, then re-prime and recoat.
Pro tip: Keep sprays and polishes with silicone away from the work area and use quality masking tapes.
Easy fix. Patchy sheen is often uneven film build or recoating outside the window.
Quick fix: After cure, lightly key the surface and apply one or two uniform coats within the recommended recoat time.
Pro tip: Keep your pass speed steady and your overlap consistent for a lovely even finish.
Yes you can. Runs happen when too much paint lands at once.
Quick fix: Let it cure fully, nib the run flat with fine abrasive, then recoat with lighter passes.
Pro tip: Multiple light coats beat one heavy coat every time.
It happens. Usually recoating too soon or too late, or layers that are not compatible.
Quick fix: Let it dry hard, sand back to a stable layer, apply a compatible primer, then recoat within the advised window.
Pro tip: Always check the recoat timings on the guidance and test a small area if you are unsure.
Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.
