How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

Federal Standard 595 B-31136 - Red Mat Aerosol Spray Paint 400ml

Buy Federal Standard 595 B-31136 - Red Mat Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.

Product Name: Federal Standard 595 B-31136 - Red Mat Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: FED12120

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 142- 64- 62

Hexadecimal Colour Code: #8E403E

30-day returns policy on all eligible faulty products. Read more about our returns policy.

Trade Application Notes

Federal Standard 595 B-31136 - Red Mat Aerosol Spray Paint is part of the Federal Standard Aerosol Spray Paint Colour Chart. Each order is batch mixed using Lechler binders and colourants, so repeat orders match across aerosols and tins for return visits and snagging.

Formats: 400 ml aerosols in 1K (ready to use) or 2K (with integrated hardener), 1 litre tins, plus touch-up pots and pens.
Finishes: Matt 0%, Satin 30%, Semi gloss 60%, Full gloss 90% to suit client specification and maintenance regime.
Surface prep: Degrease, abrade to a uniform key, remove dust and salts. Use the correct primer for the substrate and environment.
Masking and protection: Mask adjacent glazing, brick, signage and ground. Use sheeting and drop cloths to control fall-out around public areas.
Application control: Vari-nozzle cap allows wide or narrow fan patterns. HVLP-style atomisation helps with edge control and reduced overspray.
Overspray management: Plan wind direction, set screens where required and keep a safe perimeter. Night or early morning shifts help on busy sites.
Weather window: Apply on clean, dry substrates. Avoid rain risk and condensation. Follow temperature and humidity limits in the product data sheet.
Recoat and cure: Observe flash-off and recoat guidance from the TDS. Allow full cure before aggressive cleaning or handling.
2K handling: Mix accurately, respect pot life and dispose of waste responsibly. Use suitable PPE and ventilation.
Equipment: For aerosols, keep the can warm, shake thoroughly and maintain a wet edge. For tins, use compliant spray gear or mini-roller and fine foam for edges.
Coverage and finish: Apply light, even passes. Build film gradually for uniform sheen and durability.
Aftercare: Protect fresh coatings from tape pull, impact and wash-down until cured. Provide the client with basic cleaning guidance.
Repeatability: Batch codes are recorded so future top-ups can be mixed to the same colour and sheen for consistent touch-ins.

Suitable for a wide range of substrates when paired with the correct primer. Delivers smooth flow, reliable adhesion and long-term colour stability under normal service conditions.

Need a quick steer on spec or sheen? Tap the info icons beside Size, Paint Type and Gloss Level, or send us a message. For a faster reply, contact us on WhatsApp .

Safety Data Sheets

Customer Reviews

Aidan F.

★ ★ ★ ★ ★

Strong adhesion on aluminium after the right primer. ...read more

28 Jun 2025

Kara M.

★ ★ ★ ★ ★

High Resistance option is doing the trick by the coast. ...read more

28 Dec 2024

Layla R.

★ ★ ★ ★ ★

Semi gloss perfect for wipe downs in canteen. ...read more

14 Sep 2022

Frequently Asked Questions

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.