How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

NCS S 0530-Y20r Aerosol Spray Paint 400ml

Buy NCS S 0530-Y20R Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.

Product Name: NCS S 0530-Y20r Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: NCS8736

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 255-213-146

Hexadecimal Colour Code: #FFD592

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About our Paint

NCS S 0530-Y20R Aerosol Spray Paint is one of the colours from the NCS Aerosol Spray Paint Colour Chart and is available in Cellulose, Acrylic and Synthetic Enamel aerosol systems.

All our paints are custom mixed using premium Lechler binders and colourants for a consistent, long-lasting finish.

NCS S 0530-Y20R Aerosol Spray Paint can be supplied as 400ml aerosols (1K or 2K with built-in hardener), litre tins, and touch-up pots or pens.

Choose your gloss level from Matt (0%) through to Full Gloss (90%).

Optional additives include UV protection and high-resistance packages for tougher environments.

Our aerosols feature a vari-nozzle for wide/narrow patterns, HVLP-style atomisation, minimal overspray and stable pressure.

Please note: 2K aerosols are supplied as Acrylic Enamel only.

Safety Data Sheets

Customer Reviews

Adam R.

★ ★ ★ ★ ★

Semi 60% hides minor surface marks well. ...read more

28 Dec 2024

Kurt N.

★ ★ ★ ★ ★

Hard wearing on changing room doors. ...read more

28 Feb 2020

Felix B.

★ ★ ★ ★ ★

Neat repair on a cladded column. ...read more

24 Nov 2017

Frequently Asked Questions

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our paint is custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.