Technical overview of NCS S 4550-B90G Aerosol Spray Paint

NCS S 4550-B90G Aerosol Spray Paint is a custom-mixed colour from our NCS Aerosol Spray Paint chart, available as 1K (ready to use), 2K (integrated hardener for higher chemical and abrasion resistance) and 2K Air-Dry (non-isocyanate hardener). Finishes: Matt 0%, Satin 30%, Semi 60%, Full Gloss 90%. 2K aerosols are supplied as Acrylic Enamel only.

Surface preparation standards (plastics, metals, wood, uPVC)

Clean/degrease thoroughly, then key the surface (typical P400–P600 for plastics/metals). Use substrate-appropriate primers: plastic adhesion for plastics/uPVC; etch/anti-corrosive for bare metals; sealers/primers for wood; dedicated systems for glass/fibreglass. Correct priming improves adhesion and durability.

Application parameters (distance, passes, overlap, flash-off)

Spray at ~15–25 cm with steady speed and angle. Apply light, even passes with ~50% overlap. Flash-off: 1K ~5–10 minutes, 2K ~10–15 minutes depending on conditions. Use adjustable fan width to suit the area and limit overspray.

Recoat window and curing schedule (1K vs 2K)

1K: recoat after about 10–15 minutes; typical handling cure around 30 minutes. 2K: recoat after about 20–30 minutes; touch-dry roughly 40 minutes; full cure around 24–48 hours. Ambient conditions will affect all timings.

Coverage and target film build

Guide coverage is around 2 m² per coat from a 400 ml aerosol on a smooth, primed substrate. Plan for 2–4 light coats. Target around 20–40 µm total dry film thickness; a light aerosol pass can deposit roughly 10–15 µm depending on technique and conditions.

System compatibility (primers, clears, overcoating)

Use compatible primers and clears from the same system where possible. Avoid mixing dissimilar chemistries without testing. Respect recoat windows to protect intercoat adhesion and gloss. Always validate with a small test area.

Environmental conditions and safety

Apply in mild, dry conditions—ideally 10–25 °C with relative humidity under 75% and steady airflow. Keep the substrate at least ~3 °C above dew point. Use appropriate PPE (respirator, gloves, eye protection) and ensure excellent ventilation. Refer to the product data sheets for full guidance.

NCS S 4550-B90g Aerosol Spray Paint 400ml

Buy NCS S 4550-B90G Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.

Product Name: NCS S 4550-B90g Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: NCS10095

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 0-90-66

Hexadecimal Colour Code: #05A42

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About our Paint Cans

NCS S 4550-B90G Aerosol Spray Paint is part of the NCS Aerosol Spray Paint Colour Chart. We batch-mix each order using high-quality Lechler binders and colourants to keep your colour consistent across aerosols and tins.

Formats: 400ml aerosols in 1K (ready to use) or 2K (with built-in hardener), litre tins, plus touch-up pots/pens.
Finishes: Matt 0%, Satin 30%, Semi 60%, Full Gloss 90% — choose the sheen that suits your job.
Extras: Add UV protection for outdoor work or a High-Resistance package for coastal/harsh environments.
Control: Vari-nozzle cap gives wide/narrow fan options with HVLP-style atomisation and low overspray.

The Lechler-based system offers reliable flow, adhesion and long-term colour stability across a wide range of substrates (use the correct primer where needed).

Helpful tip: If you’re unsure which paint type or gloss level to pick, tap the info icons next to Size, Paint Type and Gloss Level, or send us a message. For a quicker reply, WhatsApp us here .

Safety Data Sheets

Customer Reviews

Polly D.

★ ★ ★ ★ ★

Lovely even colour and no fuss. ...read more

05 Jun 2025

Kara M.

★ ★ ★ ★ ★

High Resistance option is doing the trick by the coast. ...read more

28 Dec 2024

Amara L.

★ ★ ★ ★ ★

Even sheen across wide panels. ...read more

21 Jun 2019

Frequently Asked Questions

NCS S 4550-B90G Aerosol Spray Paint is a custom-mixed colour from our NCS Aerosol Spray Paint chart, available as:

1K aerosol/tin: ready to use; general purpose.
2K aerosol/tin: integrated hardener for higher chemical/abrasion resistance.
2K Air-Dry: 2K performance with non-isocyanate hardener for easier handling.

Finishes: Matt 0%, Satin 30%, Semi 60%, Full Gloss 90%. 2K aerosols are supplied as Acrylic Enamel only.

Clean/degrease: remove oils, silicones and residues (use panel-wipe; lint-free cloths).
Key the surface: typical aerosol prep is P400–P600 (plastics/metals), vacuum then tack-rag.
Primers: plastic adhesion for plastics/uPVC; etch/anti-corrosive for bare metals; sealers/primers for wood; dedicated systems for glass/fibreglass.

Correct priming vastly improves adhesion, opacity and long-term durability.

Spray distance: ~15–25 cm; maintain a constant angle and speed.
Technique: light, even passes with ~50% overlap; build film gradually.
Flash-off between light coats: 1K ~5–10 mins; 2K ~10–15 mins (conditions dependent).
Nozzle control: use the vari-nozzle (wide/narrow) to suit area and reduce overspray.

Always test on a small area to validate settings before full application.

1K: recoat ~10–15 mins; typical handling cure ~30 mins.
2K: recoat ~20–30 mins; touch-dry ~40 mins; full cure ~24–48 hrs.

Temperature, airflow and humidity significantly affect all timings—verify on your substrate.

Coverage guide: ~2 m² per coat from a 400 ml aerosol on a smooth, primed substrate.
Typical passes: 2–4 light coats for uniform colour and gloss.
Film build: plan for ~20–40 µm DFT across the system; a light aerosol pass can deposit ~10–15 µm (approx.).

Heavily textured/porous surfaces and strong colour changes may require additional coats.

Use system-appropriate primers and clears from the same family where possible.
Avoid mixing dissimilar chemistries without testing; perform a small adhesion/solvent-rub test first.
Observe recoat windows to protect intercoat adhesion and gloss.

For detailed guidance, refer to the data sheets below.

Ambient: ideally 10–25 °C, RH < 75%, steady airflow; substrate temperature at least ~3 °C above dew point.
PPE: suitable respirator, gloves, eye protection; ensure excellent ventilation.

See data sheets: 1K · 2K/2K Air-Dry.

Please note – Our paint is custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.