How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

Pantone 108 Aerosol Spray Paint , Tins & Tester Pots

Buy Pantone 108 aerosol spray paint in 400 ml rattle cans, litre tins, tester pots and touch-up pens colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99
Tins
1K	1 litre	10 m²	£39.99
1K	2 litres	20 m²	£59.99
2K Air Dry	1 litre	10 m²	£44.99
2K Air Dry	2 litres	20 m²	£69.99
Tester Pots
1K	60 ml	0.5 m²	£7.99
2K Air Dry	60 ml	0.5 m²	£9.99
1K	100 ml	1 m²	£9.99
2K Air Dry	100 ml	1 m²	£11.99
1K	250 ml	2.5 m²	£14.99
2K Air Dry	250 ml	2.5 m²	£16.99
Touch up Pens
1K	20 ml	0.25 m²	£7.99
2K Air Dry	20 ml	0.25 m²	£9.99

Safety Data Sheets

Product Details

Colour: Pantone 108

Product type: Custom mixed paint

Brand: One Stop Aerosols

Product Code: 5693

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 249-221-22

Hexadecimal Colour Code: #F9DD16

30-day returns policy on all eligible faulty products.

Trade Application Notes

Pantone 108 sits within our Pantone C Paint Colour Chart, mixed fresh to order using Lechler binders and colourants. The system is designed so that aerosols and tins can be ordered again later for touch ins, snagging and follow on visits without the colour drifting.

Formats: 400 ml aerosols available in 1K (ready to use) and full 2K, plus our 2K Air Dry option. 2K Air Dry gives you two pack performance that cures in air, at a gentler price point than traditional 2K, which many contractors find ideal for day to day work. We also offer 1 litre tins, touch up pots and touch up pens for detail areas.
Finishes: A choice of matt, satin, semi gloss and full gloss so you can mirror existing schemes or meet a specific client brief and maintenance plan.
Surface preparation: For the most reliable result we recommend degreasing, lightly abrading to a uniform key and carefully removing dust. Please select a primer that suits both the substrate and the environment.
Masking and protection: Nearby glass, brickwork, signage and ground surfaces benefit from simple masking and sheeting. This keeps overspray under control and helps reduce clean up time.
Application control: The vari nozzle cap can be adjusted to a wider or narrower fan pattern. This makes it easier to work up to edges, manage tight areas and keep overspray to a minimum.
Overspray awareness: On external projects it helps to think about wind direction and foot traffic. Temporary screens and a clear working zone make application calmer on live sites.
Weather window: Apply to clean, dry surfaces and avoid conditions where rain or condensation are likely. Please follow the temperature and humidity guidance in the product data sheet.
Recoat and curing: Several lighter coats with the stated flash off time usually give a smoother, more even finish. Allow the coating to fully cure before subjecting it to heavy cleaning or impact.
Working with 2K and 2K Air Dry: These products are for professional use and should be applied with suitable PPE and good ventilation. Mix accurately, respect pot life and dispose of waste materials responsibly. Many users choose 2K Air Dry where they want a two pack upgrade on durability without committing to the cost of full 2K on every job.
Equipment: Aerosols generally behave best when stored at room temperature and shaken thoroughly before use. Tins can be applied using compliant spray equipment or with a fine foam roller and brush for edges.
Coverage and appearance: Light, even passes allow the film to build gradually, helping to avoid runs and dry spray patches and giving a more consistent sheen.
Aftercare: Protect freshly coated surfaces from tape pull, impact and aggressive wash down until the coating has had time to harden. Simple, mild cleaning products are usually enough for routine maintenance.
Repeat orders: Batch details can be recorded so that future top ups are mixed back to the same colour and finish, helping return visits to feel straightforward and predictable.

Used with the correct primer this system can suit many common substrates, including metal, correctly prepared plastics and timber. The aim is a smooth, dependable finish with good adhesion and stable colour under normal service conditions.

Unsure which paint type to pick? The info icons beside Size, Paint Type and Gloss Level give a quick overview, or you can send us a message for a more detailed recommendation.

Customer Reviews

Claudia N.

★ ★ ★ ★ ★

Great atomisation and minimal overspray. ...read more

27 Feb 2025

Aimee J.

★ ★ ★ ★ ★

Edges around signage came out razor sharp. ...read more

05 Feb 2021

Zara F.

★ ★ ★ ★ ★

Good advice and quick shipping. ...read more

10 Nov 2017

Frequently Asked Questions

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.