How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

Master Chroma Isofan - N9064 - Neutral Aerosol Spray Paint Cans, Tins & Pens

Product Name: Master Chroma Isofan - N9064 - Neutral Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: MAS1223845

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 229-231-220

Hexadecimal Colour Code: #E5E7DC

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About this Paint

Master Chroma Isofan - N9064 - Neutral Aerosol Spray Paint sits within the Master Chroma Isofan Aerosol Spray Paint Colour Chart and is batch-mixed to order to maintain colour fidelity across aerosols and tins.

Available formats include 400ml 1K and 2K aerosols (with built-in hardener), litre tins, and repair pots/pens. Select from Matt 0%, Satin 30%, Semi 60% or Full Gloss 90%.

Enhance durability with optional UV protection or a high-resistance package for harsher, outdoor or coastal environments. Our vari-nozzle cap delivers a controllable fan pattern with low overspray and smooth atomisation.

We use high-grade Lechler systems for reliable adhesion, flow and long-term colour stability.

Please note: 2K aerosols are supplied in Acrylic Enamel only.

Safety Data Sheets

Customer Reviews

Marta Z.

★ ★ ★ ★ ★

Brilliant colour depth. ...read more

06 Jan 2025

Yasmin O.

★ ★ ★ ★ ★

Really pleased with the drying time. ...read more

20 Dec 2024

Amber L.

★ ★ ★ ★ ☆

Neat edges with quality masking tape. ...read more

18 May 2025

Frequently Asked Questions 3

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.