How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

RAL 3000 Flame Red Aerosol Spray Paint Cans, Tins & Pens

Product Name: RAL 3000 Flame Red Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: RAL43

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 167-41-32

Hexadecimal Colour Code: #A72920

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About this Paint Colour

Meet RAL 3000 Flame Red Aerosol Spray Paint from the RAL Classic Aerosol Spray Paint Colour Chart — mixed fresh to order for reliable colour match across every format.

What you can choose:

Formats & sizes: 400ml 1K or 2K aerosols (2K includes a built-in hardener), litre tins, and repair pots/pens.
Finish control: Matt 0% · Satin 30% · Semi 60% · Full Gloss 90%.
Performance add-ons: UV Protection for sun-exposed areas and High-Resistance for busier, outdoor or coastal sites.
Spray quality: Vari-nozzle for wide/narrow patterns, HVLP-style atomisation and minimal overspray for a tidy finish.

Using Lechler binders and colourants helps achieve consistent flow, film build and colour stability on properly prepared surfaces (pair with the right primer).

Quick guidance: A single 400ml aerosol typically covers up to ~2 m² per coat. Most colours look best with 2–4 coats, depending on the surface and the shade you’re covering.

Still deciding? See the info icons next to the selectors, or get in touch. You can also message us on WhatsApp for a quick reply.

Please note: 2K aerosols are supplied in Acrylic Enamel only.

Safety Data Sheets

Customer Reviews

Jay K.

★ ★ ★ ★ ★

Great advice on primers - plastic adhesion primer made all the difference. ...read more

22 Mar 2025

Helena P.

★ ★ ★ ★ ☆

Handy coverage, matches the guide. ...read more

12 Mar 2025

Saskia M.

★ ★ ★ ★ ★

Customer service were lovely and fast. ...read more

30 Oct 2024

Frequently Asked Questions 3

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.