What are the drying and curing times?

1K aerosol is typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes. 2K aerosol is often touch-dry in around 40 minutes and reaches full cure in 24–48 hours depending on temperature and humidity. Light coats and ventilation help; heavy passes slow curing.

How many coats and what is the recoat time?

Apply 2 to 4 light coats, observing the recommended flash-off window between coats. Building film gradually improves appearance and durability.

Do I need a primer and which one should I use?

Yes. Use the correct primer for the substrate, for example glass, fibreglass or plastics, to improve adhesion, coverage and durability. See our primers page and plastic primer for guidance.

Afnor A485 - Vert Bleu Clair Aerosol Spray Paint 400ml

Buy AFNOR A485 - VERT BLEU CLAIR Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.

Product Name: Afnor A485 - Vert Bleu Clair Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: AFN1225462

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 175-205-187

Hexadecimal Colour Code: #AFCDBB

30-day returns policy on all eligible faulty products. Read more about our returns policy.

Trade Application Notes

AFNOR A485 - VERT BLEU CLAIR Aerosol Spray Paint is part of the Afnor Aerosol Spray Paint Colour Chart. Each order is batch mixed using Lechler binders and colourants, so repeat orders match across aerosols and tins for return visits and snagging.

Formats: 400 ml aerosols in 1K (ready to use) or 2K (with integrated hardener), 1 litre tins, plus touch-up pots and pens.
Finishes: Matt 0%, Satin 30%, Semi gloss 60%, Full gloss 90% to suit client specification and maintenance regime.
Surface prep: Degrease, abrade to a uniform key, remove dust and salts. Use the correct primer for the substrate and environment.
Masking and protection: Mask adjacent glazing, brick, signage and ground. Use sheeting and drop cloths to control fall-out around public areas.
Application control: Vari-nozzle cap allows wide or narrow fan patterns. HVLP-style atomisation helps with edge control and reduced overspray.
Overspray management: Plan wind direction, set screens where required and keep a safe perimeter. Night or early morning shifts help on busy sites.
Weather window: Apply on clean, dry substrates. Avoid rain risk and condensation. Follow temperature and humidity limits in the product data sheet.
Recoat and cure: Observe flash-off and recoat guidance from the TDS. Allow full cure before aggressive cleaning or handling.
2K handling: Mix accurately, respect pot life and dispose of waste responsibly. Use suitable PPE and ventilation.
Equipment: For aerosols, keep the can warm, shake thoroughly and maintain a wet edge. For tins, use compliant spray gear or mini-roller and fine foam for edges.
Coverage and finish: Apply light, even passes. Build film gradually for uniform sheen and durability.
Aftercare: Protect fresh coatings from tape pull, impact and wash-down until cured. Provide the client with basic cleaning guidance.
Repeatability: Batch codes are recorded so future top-ups can be mixed to the same colour and sheen for consistent touch-ins.

Suitable for a wide range of substrates when paired with the correct primer. Delivers smooth flow, reliable adhesion and long-term colour stability under normal service conditions.

Need a quick steer on spec or sheen? Tap the info icons beside Size, Paint Type and Gloss Level, or send us a message. For a faster reply, contact us on WhatsApp .

Safety Data Sheets

Customer Reviews

Omar D.

★ ★ ★ ★ ★

Colour consistency between tins and aerosols was excellent. ...read more

06 Dec 2024

Sophie-Anne P.

★ ★ ★ ★ ★

Tester pot helped us pick the right shade. ...read more

06 Aug 2025

Ben W.

★ ★ ★ ★ ★

Uniform colour match to chart. ...read more

06 Nov 2015

Frequently Asked Questions

1K aerosol: touch-dry typically 15–30 minutes, handle-dry 30–60 minutes.

2K aerosol: touch-dry about 40 minutes, full cure 24–48 hours depending on temperature and humidity. Cooler or damp conditions will extend times.

Tip: Light coats and good ventilation speed things up. Avoid heavy passes that trap solvent.

As a guide, up to 2 m² per coat. Coverage varies with colour, surface profile, preparation and technique.

Tip: Keep the nozzle clean and maintain an even distance to maximise coverage.

Apply 2 to 4 light coats. Recoat within the recommended flash-off window shown in the product guidance.

Tip: Build film gradually for a uniform sheen and better durability.

Yes, we strongly recommend a suitable primer for most jobs. Match the primer to the substrate for best adhesion and durability, for example glass primers, fibreglass primers and plastic primers.

Tip: Degrease and abrade to a uniform key before priming.

Store upright in a cool, dry place away from heat and direct sunlight. Avoid freezing. For best results, use within 12–24 months of purchase.

Tip: Test a small area if the can has been stored for a long period.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.