- Landline -01908 991096
- Mobile -07793 053282
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
Free standard delivery on orders over £80 (excl. VAT) – applied at checkout!
- Landline -01908 991096
- Mobile -07793 053282
Buy BS 4800 - 10 E 50 Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.
Product Name: British Standard 4800 - 10 E 50 Aerosol Spray Paint
Manufacturer: One Stop Aerosols
Product Code: BS45174
Price: £7.99 – £69.99
Availability:In Stock
RGB Colour Code: 240-209-104
Hexadecimal Colour Code: #F0D168
30-day returns policy on all eligible faulty products. Read more about our returns policy.
BS 4800 - 10 E 50 Aerosol Spray Paint is part of the BS 4800 Aerosol Spray Paint Colour Chart. We mix every order from fresh using quality Lechler binders and colourants, so the shade you choose stays consistent across aerosols and tins.
The Lechler-based system provides excellent flow, adhesion and long-term colour stability across a wide range of substrates (use the correct primer where needed).
Tip: Not sure which paint type or gloss to choose? Tap the info buttons next to Size, Paint Type and Gloss Level, or send us a message. For a quicker reply, WhatsApp us here .
Please note: 2K aerosols are supplied in Acrylic Enamel only.
1K aerosol: typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes, depending on film build and conditions.
2K aerosol: often touch-dry in around 40 minutes. Full cure is usually achieved within 24–48 hours, influenced by temperature, humidity and ventilation. Cooler or damp conditions will extend curing time.
As a guide, a 400 ml aerosol will cover up to approximately 2 m² per coat. Actual coverage varies with colour, substrate profile, preparation and application technique.
For best results apply 2 to 4 light coats. The exact number depends on the colour selected, the colour being covered and the substrate. Allow the recommended flash-off between coats.
We strongly recommend using the correct primer for most applications. Choose a primer that suits the substrate, for example glass primers, fibreglass primers and plastic primers. The right primer improves adhesion, coverage and durability.
Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.