Technical overview of British Standard 5252 00 A 05 Aerosol Spray Paint

British Standard 5252 00 A 05 Aerosol Spray Paint is a custom-mixed colour from our British Standard BS 5252 Colours chart, available as 1K (ready to use), 2K (integrated hardener for higher chemical and abrasion resistance) and 2K Air-Dry (non-isocyanate hardener). Finishes: Matt 0%, Satin 30%, Semi 60%, Full Gloss 90%. 2K aerosols are supplied as Acrylic Enamel only.

Surface preparation standards (plastics, metals, wood, uPVC)

Clean/degrease thoroughly, then key the surface (typical P400–P600 for plastics/metals). Use substrate-appropriate primers: plastic adhesion for plastics/uPVC; etch/anti-corrosive for bare metals; sealers/primers for wood; dedicated systems for glass/fibreglass. Correct priming improves adhesion and durability.

Application parameters (distance, passes, overlap, flash-off)

Spray at ~15–25 cm with steady speed and angle. Apply light, even passes with ~50% overlap. Flash-off: 1K ~5–10 minutes, 2K ~10–15 minutes depending on conditions. Use adjustable fan width to suit the area and limit overspray.

Recoat window and curing schedule (1K vs 2K)

1K: recoat after about 10–15 minutes; typical handling cure around 30 minutes. 2K: recoat after about 20–30 minutes; touch-dry roughly 40 minutes; full cure around 24–48 hours. Ambient conditions will affect all timings.

Coverage and target film build

Guide coverage is around 2 m² per coat from a 400 ml aerosol on a smooth, primed substrate. Plan for 2–4 light coats. Target around 20–40 µm total dry film thickness; a light aerosol pass can deposit roughly 10–15 µm depending on technique and conditions.

System compatibility (primers, clears, overcoating)

Use compatible primers and clears from the same system where possible. Avoid mixing dissimilar chemistries without testing. Respect recoat windows to protect intercoat adhesion and gloss. Always validate with a small test area.

Environmental conditions and safety

Apply in mild, dry conditions—ideally 10–25 °C with relative humidity under 75% and steady airflow. Keep the substrate at least ~3 °C above dew point. Use appropriate PPE (respirator, gloves, eye protection) and ensure excellent ventilation. Refer to the product data sheets for full guidance.

British Standard 5252 00 A 05 Aerosol Spray Paint 400ml Cans

Buy British Standard 5252 00 A 05 Aerosol Spray Paint in 400ml aerosol rattle cans, liter tins, tester pots & touch up pens colour-matched & mixed to order. Available in 1K or 2K & 2K Air Dry in matt, satin, or full gloss finishes.

British Standard 5252 00 A 05 Paint Liter Tin

British Standard 5252 00 A 05 Paint Touch up & Repair Pen

British Standard 5252 00 A 05 Paint Tester Pot

British Standard 5252 00 A 05 Paint Colour Swatch

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99
Tins
1K	1 litre	10 m²	£39.99
1K	2 litres	20 m²	£59.99
2K Air Dry	1 litre	10 m²	£44.99
2K Air Dry	2 litres	20 m²	£69.99
Tester Pots
1K	60 ml	0.5 m²	£7.99
2K Air Dry	60 ml	0.5 m²	£9.99
1K	100 ml	1 m²	£9.99
2K Air Dry	100 ml	1 m²	£11.99
1K	250 ml	2.5 m²	£14.99
2K Air Dry	250 ml	2.5 m²	£16.99
Touch up Pens
1K	20 ml	0.25 m²	£7.99
2K Air Dry	20 ml	0.25 m²	£9.99

Safety Data Sheets

Product Details

Product Name: British Standard 5252 00 A 05 Aerosol Spray Paint

Brand: One Stop Aerosols

Product Code: 5450

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 177-176-174

Hexadecimal Colour Code: #B1B0AE

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About our Paint

Engineered for professional results, British Standard 5252 00 A 05 Aerosol Spray Paint from the British Standard BS 5252 Colours range is mixed to order for colour accuracy and durability.

Systems: Cellulose, Acrylic, Synthetic Enamel (aerosol, tins, touch-up options).
2K Option: 400ml cans with integrated hardener for higher chemical and abrasion resistance.
Finish control: Matt (0%) to Full Gloss (90%).
Additives: UV protection and high-resistance packages available on request.
Spray quality: Vari-nozzle for adjustable fan pattern and HVLP-like atomisation.

Formulated with Lechler binders/colourants for consistent film build and long-term performance.

Note: The 2K aerosol system is supplied as Acrylic Enamel.

Customer Reviews

Louie G.

★ ★ ★ ★ ★

Quick to flash off and easy to recoat. ...read more

16 Nov 2024

Oli P.

★ ★ ★ ★ ★

Finish feels tough and cleans easily. ...read more

24 Apr 2020

Jon V.

★ ★ ★ ★ ★

Edges crisp even on beaded frames. ...read more

19 Jan 2018

Frequently Asked Questions

British Standard 5252 00 A 05 Aerosol Spray Paint is a custom-mixed colour from our British Standard BS 5252 Colours chart, available as:

1K aerosol/tin: ready to use; general purpose.
2K aerosol/tin: integrated hardener for higher chemical/abrasion resistance.
2K Air-Dry: 2K performance with non-isocyanate hardener for easier handling.

Finishes: Matt 0%, Satin 30%, Semi 60%, Full Gloss 90%. 2K aerosols are supplied as Acrylic Enamel only.

Clean/degrease: remove oils, silicones and residues (use panel-wipe; lint-free cloths).
Key the surface: typical aerosol prep is P400–P600 (plastics/metals), vacuum then tack-rag.
Primers: plastic adhesion for plastics/uPVC; etch/anti-corrosive for bare metals; sealers/primers for wood; dedicated systems for glass/fibreglass.

Correct priming vastly improves adhesion, opacity and long-term durability.

Spray distance: ~15–25 cm; maintain a constant angle and speed.
Technique: light, even passes with ~50% overlap; build film gradually.
Flash-off between light coats: 1K ~5–10 mins; 2K ~10–15 mins (conditions dependent).
Nozzle control: use the vari-nozzle (wide/narrow) to suit area and reduce overspray.

Always test on a small area to validate settings before full application.

1K: recoat ~10–15 mins; typical handling cure ~30 mins.
2K: recoat ~20–30 mins; touch-dry ~40 mins; full cure ~24–48 hrs.

Temperature, airflow and humidity significantly affect all timings—verify on your substrate.

Coverage guide: ~2 m² per coat from a 400 ml aerosol on a smooth, primed substrate.
Typical passes: 2–4 light coats for uniform colour and gloss.
Film build: plan for ~20–40 µm DFT across the system; a light aerosol pass can deposit ~10–15 µm (approx.).

Heavily textured/porous surfaces and strong colour changes may require additional coats.

Use system-appropriate primers and clears from the same family where possible.
Avoid mixing dissimilar chemistries without testing; perform a small adhesion/solvent-rub test first.
Observe recoat windows to protect intercoat adhesion and gloss.

For detailed guidance, refer to the data sheets below.

Ambient: ideally 10–25 °C, RH < 75%, steady airflow; substrate temperature at least ~3 °C above dew point.
PPE: suitable respirator, gloves, eye protection; ensure excellent ventilation.

See data sheets: 1K · 2K/2K Air-Dry.

Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.

Please read our guide on safe storage and handling of aerosol spray paints.