What are the drying times for aerosols

1K aerosol paint takes around 30 minutes to cure completely. 2K aerosol is typically touch-dry in about 40 minutes and reaches a full cure in 24–48 hours depending on temperature and humidity.

What sort of coverage can I expect?

A 400ml aerosol typically covers up to approximately 2 m² per coat, depending on colour, surface profile and preparation.

How many coats do you recommend?

For best results, apply 2–4 coats depending on the colour chosen, the existing colour being covered and the surface material.

Do I have to use a primer before applying a topcoat?

We strongly recommend using the correct primer for the substrate (e.g., glass, fibreglass, plastics). See our primers page and plastic primer for guidance.

Dulux Trade 10Rr 83/009 - Mallow White Aerosol Spray Paint

Buy Dulux Trade 10RR 83/009 - Mallow White aerosol spray paint in 400 ml rattle cans, colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.

Dulux Trade 10RR 83/009 - Mallow White Paint Colour Swatch

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99

Safety Data Sheets

Product Details

Colour: Dulux Trade 10Rr 83/009 - Mallow White

Product type: Custom mixed paint

Brand: One Stop Aerosols

Product Code: 1226381

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 236-234-235

Hexadecimal Colour Code: #ECEAEB

30-day returns policy on all eligible faulty products.

Trade Application Notes

Dulux Trade 10RR 83/009 - Mallow White sits within our Dulux Trade Paint Colour Chart, mixed fresh to order using Lechler binders and colourants. The system is designed so that aerosols and tins can be ordered again later for touch ins, snagging and follow on visits without the colour drifting.

Formats: 400 ml aerosols available in 1K (ready to use) and full 2K, plus our 2K Air Dry option. 2K Air Dry gives you two pack performance that cures in air, at a gentler price point than traditional 2K, which many contractors find ideal for day to day work. We also offer 1 litre tins, touch up pots and touch up pens for detail areas.
Finishes: A choice of matt, satin, semi gloss and full gloss so you can mirror existing schemes or meet a specific client brief and maintenance plan.
Surface preparation: For the most reliable result we recommend degreasing, lightly abrading to a uniform key and carefully removing dust. Please select a primer that suits both the substrate and the environment.
Masking and protection: Nearby glass, brickwork, signage and ground surfaces benefit from simple masking and sheeting. This keeps overspray under control and helps reduce clean up time.
Application control: The vari nozzle cap can be adjusted to a wider or narrower fan pattern. This makes it easier to work up to edges, manage tight areas and keep overspray to a minimum.
Overspray awareness: On external projects it helps to think about wind direction and foot traffic. Temporary screens and a clear working zone make application calmer on live sites.
Weather window: Apply to clean, dry surfaces and avoid conditions where rain or condensation are likely. Please follow the temperature and humidity guidance in the product data sheet.
Recoat and curing: Several lighter coats with the stated flash off time usually give a smoother, more even finish. Allow the coating to fully cure before subjecting it to heavy cleaning or impact.
Working with 2K and 2K Air Dry: These products are for professional use and should be applied with suitable PPE and good ventilation. Mix accurately, respect pot life and dispose of waste materials responsibly. Many users choose 2K Air Dry where they want a two pack upgrade on durability without committing to the cost of full 2K on every job.
Equipment: Aerosols generally behave best when stored at room temperature and shaken thoroughly before use. Tins can be applied using compliant spray equipment or with a fine foam roller and brush for edges.
Coverage and appearance: Light, even passes allow the film to build gradually, helping to avoid runs and dry spray patches and giving a more consistent sheen.
Aftercare: Protect freshly coated surfaces from tape pull, impact and aggressive wash down until the coating has had time to harden. Simple, mild cleaning products are usually enough for routine maintenance.
Repeat orders: Batch details can be recorded so that future top ups are mixed back to the same colour and finish, helping return visits to feel straightforward and predictable.

Used with the correct primer this system can suit many common substrates, including metal, correctly prepared plastics and timber. The aim is a smooth, dependable finish with good adhesion and stable colour under normal service conditions.

Unsure which paint type to pick? The info icons beside Size, Paint Type and Gloss Level give a quick overview, or you can send us a message for a more detailed recommendation.

Customer Reviews

Nathan I.

★ ★ ★ ☆ ☆

Colour was slightly darker than I expected indoors. ...read more

29 Mar 2024

Isla W.

★ ★ ★ ★ ★

Advice on plastic primer was spot on. ...read more

18 Feb 2025

Erin S.

★ ★ ★ ★ ★

Plastic primer plus 1K topcoat worked great. ...read more

25 Mar 2024

Frequently Asked Questions

1K Aerosol paint takes around 30 minutes to cure completely.

The time it takes for a 2K aerosol to touch dry in 40 minutes. To dry out thoroughly is 24-48 hours depending on the conditions the paint is used in, for example, it will take longer to fully cure if applied outside in colder or damper conditions as opposed to a hot summer's day.

You can expect to be able to coat roughly 2 square meters in a single coat using a 400ml aerosol.

For best results, we recommend 2-4 coats depending on the colour chosen, existing colour to be re top coated and surface material to be sprayed.

We highly recommend the use of a primer for almost all your painting plans, we stock and supply the correct primers necessary for the surface material, example glass primers, fibreglass primers and plastic primers. When choosing a primer, it is essential to select the proper primer for the surface material you plan to apply the topcoat.

Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.