- Landline -01908 991096
- Mobile -07793 053282
- Landline -01908 991096
- Mobile -07793 053282
Buy Dulux Trade 60YR 23/650 - Auburn Falls 3 aerosol spray paint in 400 ml rattle cans, colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.
| Format | Size | Coverage | Price |
|---|---|---|---|
| Aerosol Cans | |||
| 1K | 400 ml | 1.5 m2 | £12.99 |
| 2K | 400 ml | 1.5 m2 | £19.99 |
| 2K Air Dry | 400 ml | 1.5 m2 | £15.99 |
Colour: Dulux Trade 60Yr 23/650 - Auburn Falls 3
Product type: Custom mixed paint
Brand: One Stop Aerosols
Product Code: 1225709
Price: £7.99 – £69.99 + VAT
Availability: In Stock
RGB Colour Code: 208-98-46
Hexadecimal Colour Code: #D0622E
30-day returns policy on all eligible faulty products.
Meet Dulux Trade 60YR 23/650 - Auburn Falls 3 from the Dulux Trade Paint colour chart, mixed fresh to order for reliable colour match across every format.
What you can choose:
Using Lechler binders and colourants helps achieve consistent flow, film build and colour stability on properly prepared surfaces (pair with the right primer).
Quick guidance: A single 400ml aerosol typically covers up to about 2 m² per coat. Most colours look best with 2 to 4 light coats, depending on the surface and the shade you are covering.
Still deciding? See the info icons next to the selectors, or get in touch or message us on WhatsApp.
Please note: 2K aerosols are supplied in acrylic enamel only.
1K aerosol: typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes, depending on film build and conditions.
2K aerosol: often touch-dry in around 40 minutes. Full cure is usually achieved within 24–48 hours, influenced by temperature, humidity and ventilation. Cooler or damp conditions will extend curing time.
As a guide, a 400 ml aerosol will cover up to approximately 2 m² per coat. Actual coverage varies with colour, substrate profile, preparation and application technique.
For best results apply 2 to 4 light coats. The exact number depends on the colour selected, the colour being covered and the substrate. Allow the recommended flash-off between coats.
We strongly recommend using the correct primer for most applications. Choose a primer that suits the substrate, for example glass primers, fibreglass primers and plastic primers. The right primer improves adhesion, coverage and durability.
Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.
