Is it suitable for metal, plastic, wood and uPVC?

Yes, with proper preparation and the correct primer for each substrate. Use plastic adhesion primers for plastics/uPVC, metal or etch primers for metals, sealing/priming for wood, and dedicated primers for glass or fibreglass.

How much will I need (coverage & coats)?

As a guide, a 400 ml aerosol covers up to approximately 2 m² per coat on a smooth, primed surface. Most projects need 2–4 coats depending on colour, surface profile and what is being covered.

How long does it take to dry and fully cure?

For 1K, recoat after about 10–15 minutes; typical cure is around 30 minutes depending on conditions. For 2K, recoat after about 20–30 minutes; touch-dry is roughly 40 minutes and full cure is usually 24–48 hours.

Can I use it outdoors and will the colour fade?

Yes, provided correct preparation and priming. Add UV Protection to help maintain colour on sun-exposed surfaces and consider a High-Resistance package for coastal or high-wear areas.

NCS S 0530-R50b Aerosol Spray Paint , Tins & Tester Pots

Buy NCS S 0530-R50B aerosol spray paint in 400 ml rattle cans, litre tins, tester pots and touch-up pens colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.

NCS S 0530-R50B Paint Touch up & Repair Pen

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99
Tins
1K	1 litre	10 m²	£39.99
1K	2 litres	20 m²	£59.99
2K Air Dry	1 litre	10 m²	£44.99
2K Air Dry	2 litres	20 m²	£69.99
Tester Pots
1K	60 ml	0.5 m²	£7.99
2K Air Dry	60 ml	0.5 m²	£9.99
1K	100 ml	1 m²	£9.99
2K Air Dry	100 ml	1 m²	£11.99
1K	250 ml	2.5 m²	£14.99
2K Air Dry	250 ml	2.5 m²	£16.99
Touch up Pens
1K	20 ml	0.25 m²	£7.99
2K Air Dry	20 ml	0.25 m²	£9.99

Safety Data Sheets

Product Details

Colour: NCS S 0530-R50b

Product type: Custom mixed paint

Brand: One Stop Aerosols

Product Code: 8731

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 215-189-226

Hexadecimal Colour Code: #D7BDE2

30-day returns policy on all eligible faulty products.

Trade Application Notes

NCS S 0530-R50B forms part of our NCS (Natural Colour System) Paint Colour Chart. Each order is mixed fresh using Lechler binders and colourants so that aerosols, tins and touch up products can be reordered later with confidence for snagging, repairs and small additions.

Formats: 400 ml aerosols are available in 1K (ready to use), full 2K, and 2K Air Dry. 2K Air Dry is designed to give a two pack style upgrade on durability while usually sitting at a lower price point than traditional 2K, which makes it a popular option for regular contract work. We also offer 1 litre tins, touch up pots and touch up pens.
Finishes: Choose from matt, satin, semi gloss or full gloss so you can follow an existing scheme or match a client specification and cleaning regime.
Surface preparation: For best results, degrease thoroughly, lightly abrade to a uniform key and remove dust and loose material. Please select a primer that is appropriate for the substrate and service conditions.
Masking and protection: We recommend masking nearby glass, brickwork, signs and ground finishes, and using simple sheeting where needed. This keeps overspray under control and helps with handover on live sites.
Application control: The vari nozzle cap can be set to a wide or narrow fan pattern to suit the area you are working on. This gives better control on edges, corners and detail work.
Managing overspray: On exterior projects it helps to think about wind direction and how people move through the space. Temporary screens and a clearly marked working zone can make application smoother and more relaxed.
Weather window: Apply only to clean, dry substrates. Avoid times where rain, heavy dew or condensation are likely. Please follow the temperature and humidity guidance set out in the technical data sheet.
Recoat and curing: Several light coats with the recommended flash off time normally give a more even finish than one heavy pass. Allow the coating to cure fully before exposing it to aggressive cleaning or impact.
2K and 2K Air Dry products: These are professional coatings and should be used with suitable PPE and good ventilation. Mix carefully, respect pot life and dispose of any remaining material responsibly. In many cases, 2K Air Dry is chosen as the day to day option for improved durability where full 2K is not required on every job.
Equipment: Aerosols usually perform best when kept at room temperature and shaken well before and during use. Tinned product can be applied using compliant spray equipment or with a fine foam roller and a small brush for edges.
Coverage and appearance: Aim for smooth, overlapping passes and build the film gradually. This helps to avoid runs and dry spray, and supports a more consistent sheen across the whole area.
Aftercare: Try to protect freshly coated surfaces from tape pull, knocks and high pressure cleaning until the coating has had time to harden. Mild cleaning solutions are usually enough for routine maintenance.
Repeat orders: Batch details can be recorded so that top ups and follow on work can be supplied back to the same colour and finish, helping return visits feel straightforward for both you and your client.

Combined with the correct primer, this system can be suitable for many common substrates such as metal, correctly prepared plastics and timber. The goal is a smooth, dependable finish with sound adhesion and stable colour under normal service conditions.

Not sure whether to choose 1K, 2K or 2K Air Dry? The info icons beside Size, Paint Type and Gloss Level give a quick overview, or you can get in touch if you would like us to talk through the options.

Customer Reviews

Hugo R.

★ ★ ★ ★ ★

Excellent on a steel handrail after prep. ...read more

15 Apr 2024

Megan C.

★ ★ ★ ★ ★

Great on cladding patch repairs. ...read more

02 Jul 2024

Stuart Y.

★ ★ ★ ★ ★

Fast turnaround helped our programme. ...read more

25 Sep 2020

Frequently Asked Questions

NCS S 0530-R50B Aerosol Spray Paint is a custom-mixed aerosol spray paint colour from our NCS (Natural Colour System) Paint chart. It’s supplied in 400 ml 1K or 2K aerosols (2K has a built-in hardener), litre tins, plus touch-up pots/pens. Choose finishes from Matt 0% to Full Gloss 90%.

Yes—prepare properly and use the right primer for each substrate:

Plastics/uPVC: use a plastic adhesion primer (see our plastic primer).
Metals: use metal/etch primers; protect bare steel promptly.
Wood: seal/prime to prevent absorption and improve adhesion.
Glass/Fibreglass: use dedicated glass/fibreglass primers.

2K aerosols include a hardener for superior chemical and abrasion resistance—ideal for high-traffic or demanding environments. 1K is convenient and great for lighter-duty tasks or quick repairs.

Note: 2K aerosols are supplied as Acrylic Enamel only.

As a guide, a 400 ml aerosol covers up to ~2 m² per coat on a smooth, primed surface. Most projects look best with 2–4 coats, depending on colour, surface profile and what you’re covering.

1K: Recoat after ~10–15 mins; typical cure ~30 mins (conditions dependent).
2K: Recoat ~20–30 mins; touch-dry ~40 mins; full cure 24–48 hrs.

Temperature/humidity affect results—always test first.

Yes—prep correctly and consider add-ons for longevity:

UV Protection: helps maintain colour on sun-exposed surfaces.
High-Resistance package: extra toughness for coastal or high-wear areas.

Spray in a mild, dry environment—ideally 10–25 °C with low humidity and steady airflow. Avoid very cold, hot or damp conditions which can slow drying or cause defects.

For safety and handling, see our data sheets: 1K · 2K/2K Air-Dry.

Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.