How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

RAL 1004 Golden Yellow Aerosol Spray Paint Cans, Tins & Pens

Product Name: RAL 1004 Golden Yellow Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: RAL4

Price: £7.99 – £69.99

Availability:In Stock

RGB Colour Code: 228-158-0

Hexadecimal Colour Code: #E49E00

30-day returns policy on all eligible faulty products. Read more about our returns policy.

About our Paints

RAL 1004 Golden Yellow Aerosol Spray Paint is part of the RAL Classic Aerosol Spray Paint Colour Chart. We mix every order from fresh using quality Lechler binders and colourants, so the shade you choose stays consistent across aerosols and tins.

Formats & sizes: 400ml aerosols in 1K (ready to use) or 2K (with built-in hardener), litre tins, plus repair pots/pens for touch-ups.
Finish options: Matt 0%, Satin 30%, Semi 60%, or Full Gloss 90%—pick the sheen that suits your project.
Optional extras: Add UV Protection for outdoor use or a High-Resistance package for tougher, high-traffic or coastal environments.
Smoother spraying: Our vari-nozzle lets you switch between wide and narrow fan patterns with HVLP-style atomisation for low overspray and an even finish.

The Lechler-based system provides excellent flow, adhesion and long-term colour stability across a wide range of substrates (use the correct primer where needed).

Tip: Not sure which paint type or gloss to choose? Tap the info buttons next to Size, Paint Type and Gloss Level, or send us a message. For a quicker reply, WhatsApp us here .

Please note: 2K aerosols are supplied in Acrylic Enamel only.

Safety Data Sheets

Customer Reviews

Priya K.

★ ★ ★ ★ ☆

Nice satin sheen and smooth flow. Hardly any runs. ...read more

12 Aug 2025

Reuben A.

★ ★ ★ ★ ☆

Flowed nicely on a radiator after degreasing. ...read more

10 Dec 2024

Isla W.

★ ★ ★ ★ ★

Lovely gloss on a metal gate. ...read more

14 Jan 2025

Frequently Asked Questions 3

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.