How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

Pantone 234 Aerosol Spray Paint , Tins & Tester Pots

Buy Pantone 234 aerosol spray paint in 400 ml rattle cans, litre tins, tester pots and touch-up pens colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99
Tins
1K	1 litre	10 m²	£39.99
1K	2 litres	20 m²	£59.99
2K Air Dry	1 litre	10 m²	£44.99
2K Air Dry	2 litres	20 m²	£69.99
Tester Pots
1K	60 ml	0.5 m²	£7.99
2K Air Dry	60 ml	0.5 m²	£9.99
1K	100 ml	1 m²	£9.99
2K Air Dry	100 ml	1 m²	£11.99
1K	250 ml	2.5 m²	£14.99
2K Air Dry	250 ml	2.5 m²	£16.99
Touch up Pens
1K	20 ml	0.25 m²	£7.99
2K Air Dry	20 ml	0.25 m²	£9.99

Safety Data Sheets

Product Details

Colour: Pantone 234

Product type: Custom mixed paint

Brand: One Stop Aerosols

Product Code: 5818

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 170-0-102

Hexadecimal Colour Code: #AA0066

30-day returns policy on all eligible faulty products.

Trade Application Notes

Pantone 234 forms part of our Pantone C Paint Colour Chart. Each order is mixed fresh using Lechler binders and colourants so that aerosols, tins and touch up products can be reordered later with confidence for snagging, repairs and small additions.

Formats: 400 ml aerosols are available in 1K (ready to use), full 2K, and 2K Air Dry. 2K Air Dry is designed to give a two pack style upgrade on durability while usually sitting at a lower price point than traditional 2K, which makes it a popular option for regular contract work. We also offer 1 litre tins, touch up pots and touch up pens.
Finishes: Choose from matt, satin, semi gloss or full gloss so you can follow an existing scheme or match a client specification and cleaning regime.
Surface preparation: For best results, degrease thoroughly, lightly abrade to a uniform key and remove dust and loose material. Please select a primer that is appropriate for the substrate and service conditions.
Masking and protection: We recommend masking nearby glass, brickwork, signs and ground finishes, and using simple sheeting where needed. This keeps overspray under control and helps with handover on live sites.
Application control: The vari nozzle cap can be set to a wide or narrow fan pattern to suit the area you are working on. This gives better control on edges, corners and detail work.
Managing overspray: On exterior projects it helps to think about wind direction and how people move through the space. Temporary screens and a clearly marked working zone can make application smoother and more relaxed.
Weather window: Apply only to clean, dry substrates. Avoid times where rain, heavy dew or condensation are likely. Please follow the temperature and humidity guidance set out in the technical data sheet.
Recoat and curing: Several light coats with the recommended flash off time normally give a more even finish than one heavy pass. Allow the coating to cure fully before exposing it to aggressive cleaning or impact.
2K and 2K Air Dry products: These are professional coatings and should be used with suitable PPE and good ventilation. Mix carefully, respect pot life and dispose of any remaining material responsibly. In many cases, 2K Air Dry is chosen as the day to day option for improved durability where full 2K is not required on every job.
Equipment: Aerosols usually perform best when kept at room temperature and shaken well before and during use. Tinned product can be applied using compliant spray equipment or with a fine foam roller and a small brush for edges.
Coverage and appearance: Aim for smooth, overlapping passes and build the film gradually. This helps to avoid runs and dry spray, and supports a more consistent sheen across the whole area.
Aftercare: Try to protect freshly coated surfaces from tape pull, knocks and high pressure cleaning until the coating has had time to harden. Mild cleaning solutions are usually enough for routine maintenance.
Repeat orders: Batch details can be recorded so that top ups and follow on work can be supplied back to the same colour and finish, helping return visits feel straightforward for both you and your client.

Combined with the correct primer, this system can be suitable for many common substrates such as metal, correctly prepared plastics and timber. The goal is a smooth, dependable finish with sound adhesion and stable colour under normal service conditions.

Not sure whether to choose 1K, 2K or 2K Air Dry? The info icons beside Size, Paint Type and Gloss Level give a quick overview, or you can get in touch if you would like us to talk through the options.

Customer Reviews

Sanjay V.

★ ★ ★ ★ ★

2K Air Dry is so convenient. ...read more

21 Apr 2025

Vik A.

★ ★ ★ ★ ★

High Resistance option is worth it. ...read more

01 Feb 2025

Mohammed S.

★ ★ ★ ★ ★

Good coverage and dries quickly between coats. ...read more

22 Aug 2025

Frequently Asked Questions

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.