How do I get a neat edge and keep overspray to a minimum?

Use quality masking tape on clean, dry surfaces. Seal tape edges with a light first pass. Spray light, even coats and aim the fan just off the masked edge. Remove tape once the final coat has tacked off. Adjust the vari-nozzle to suit the area and reduce overspray.

Can I mix aerosols and tins on the same project?

Yes. Use the same colour/code and system, and test first. Blend on natural breaks such as trims or panel edges to hide texture differences. Keep gloss level consistent for a uniform finish.

Help! I’m seeing runs, orange peel or dry spray

Runs: too much paint or too close—allow to cure, de-nib/flat and recoat lightly. Orange peel: heavy coats or poor conditions—use lighter passes and maintain distance. Dry spray: too far away or windy—move closer (around 15–25 cm) and control airflow.

RAL Effect 110-3 Aerosol Spray Paint 400ml

Buy RAL Effect 110-3 Aerosol Spray Paint 400ml, colour matched & mixed to order. Available in 1K or 2K with matt, satin or gloss finishes. Professional fan nozzel, even coverage & fast UK delivery.

Product Name: RAL Effect 110-3 Aerosol Spray Paint

Manufacturer: One Stop Aerosols

Product Code: RAL1225519

Price: £12.99 – £74.99

Availability:In Stock

RGB Colour Code: 199-198-190

Hexadecimal Colour Code: #C7C6BE

30-day returns policy on all eligible faulty products. Read more about our returns policy.

Technical Overview

RAL Effect 110-3 Aerosol Spray Paint is part of the RAL Effects Aerosol Spray Paint Colour Chart. Orders are batch mixed to specification using premium Lechler binders and colourants for repeatable colour across aerosols and tins.

Formats: 400 ml aerosols in 1K (ready to use) or 2K (with integrated hardener), 1 litre tins, plus touch-up pots and pens.
Finishes: Matt 0%, Satin 30%, Semi gloss 60%, Full gloss 90%. Select the sheen to match appearance and cleanability requirements.
Performance options: UV protection for exterior exposure, or High-Resistance for coastal and demanding environments.
Application control: Vari-nozzle cap for wide or narrow fan patterns with HVLP-style atomisation and reduced overspray.
Coverage and build: Formulated for smooth flow and consistent film build when applied to a properly prepared surface.

Suitable for a broad range of substrates when used with the correct primer. Provides smooth application, reliable adhesion and durable colour stability.

Need guidance: Tap the icons beside Size, Paint Type and Gloss Level for quick help, or send us a message. For a faster reply, contact us on WhatsApp .

Safety Data Sheets

Customer Reviews

Emily S.

★ ★ ★ ★ ★

Touch up pen was ideal for small chips. ...read more

14 Jul 2025

Kara R.

★ ★ ★ ★ ★

Uniform sheen with light passes. ...read more

03 Aug 2018

Tegan L.

★ ★ ★ ★ ★

Edges stayed clean on textured surfaces. ...read more

31 Jul 2015

Frequently Asked Questions

Use good quality masking tape and clean, dry surfaces before taping.
Seal tape edges with a light first pass to prevent bleed.
Spray light, even coats; aim the fan just off the masked edge rather than into it.
Remove tape carefully once the final coat has tacked off.
Switch our vari-nozzle between wide/narrow to suit the area and reduce overspray.

Aim for a mild, dry day with good airflow. Avoid very cold, hot or humid conditions, which can slow drying or cause defects. Always test on a small area first.

Yes—use the same colour/code and system (1K/2K) and test first. Blending on natural breaks (edges, trims, panels) helps hide any texture differences. Keep gloss level consistent for a uniform look.

Runs: Too much paint or spraying too close. Let it cure, then de-nib/flat and recoat lightly.
Orange peel: Heavy coats or poor conditions. Use lighter passes and maintain steady distance.
Dry spray: Too far away or windy. Move closer (within 15–25 cm) and improve airflow control.

Store upright in a cool, dry place away from heat and direct sunlight. Clear the nozzle after use with a short burst. For best results, use within 12 months.

Yes—tester pots are available on many colours. Check the Size selector for current options before you commit to larger quantities.

Please note – Our aerosol cans, litre tins and touch up and repair pots/pens are custom mixed and should be tested before application. We do not take responsibility for any colour difference once you have applied the paint to your surfaces. If the colour is not accurate, please contact us to arrange a return.