- Landline -01908 991096
- Mobile -07793 053282
- Landline -01908 991096
- Mobile -07793 053282
Buy RAL Effect 810-3 - Grey aerosol spray paint in 400 ml rattle cans, tester pots and touch-up pens colour matched and mixed to order. Available in 1K or 2K and 2K air-dry in matt, satin or full gloss finishes.
| Format | Size | Coverage | Price |
|---|---|---|---|
| Aerosol Cans | |||
| 1K | 400 ml | 1.5 m2 | £17.99 |
| 2K | 400 ml | 1.5 m2 | £24.99 |
| 2K Air Dry | 400 ml | 1.5 m2 | £20.99 |
| Tester Pots | |||
| 1K | 60 ml | 0.5 m2 | £12.99 |
| 2K Air Dry | 60 ml | 0.5 m2 | £14.99 |
| 1K | 100 ml | 1 m2 | £14.99 |
| 2K Air Dry | 100 ml | 1 m2 | £16.99 |
| 1K | 250 ml | 2.5 m2 | £19.99 |
| 2K Air Dry | 250 ml | 2.5 m2 | £21.99 |
| Touch up Pens | |||
| 1K | 20 ml | 0.25 m2 | £12.99 |
| 2K Air Dry | 20 ml | 0.25 m2 | £14.99 |
Colour: RAL Effect 810-3 - Grey
Product type: Custom mixed paint
Brand: One Stop Aerosols
Product Code: 12003
Price: £12.99 – £74.99 + VAT
Availability: In Stock
RGB Colour Code: 123-136-142
Hexadecimal Colour Code: #7B888E
30-day returns policy on all eligible faulty products.
Engineered for professional results, RAL Effect 810-3 - Grey from the RAL Effects Paint range is mixed to order for colour accuracy and durability.
Formulated with Lechler binders/colourants for consistent film build and long term performance.
Note: The 2K aerosol system is supplied as Acrylic Enamel.
1K aerosol: typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes, depending on film build and conditions.
2K aerosol: often touch-dry in around 40 minutes. Full cure is usually achieved within 24–48 hours, influenced by temperature, humidity and ventilation. Cooler or damp conditions will extend curing time.
As a guide, a 400 ml aerosol will cover up to approximately 2 m² per coat. Actual coverage varies with colour, substrate profile, preparation and application technique.
For best results apply 2 to 4 light coats. The exact number depends on the colour selected, the colour being covered and the substrate. Allow the recommended flash-off between coats.
We strongly recommend using the correct primer for most applications. Choose a primer that suits the substrate, for example glass primers, fibreglass primers and plastic primers. The right primer improves adhesion, coverage and durability.
Please note: our paint is custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.
