What are the drying and curing times for aerosols?

1K aerosol is typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes. 2K aerosol is often touch-dry in around 40 minutes and reaches full cure in 24–48 hours, depending on temperature, humidity and ventilation.

How many coats do you recommend?

Apply 2 to 4 light coats, allowing the recommended flash-off between coats. The exact number depends on the colour chosen, the colour being covered and the substrate.

Do I need to use a primer before the topcoat?

Yes, we strongly recommend using the correct primer for the substrate, such as glass, fibreglass or plastics. The appropriate primer improves adhesion, coverage and durability. See our primers page and plastic primer for guidance.

Federal Standard 595 B-37875 - White Mat Aerosol Spray Paint , Tins & Tester Pots

Federal Standard 595 B-37875 - White Mat Paint Litre Tin

Federal Standard 595 B-37875 - White Mat Paint Touch up & Repair Pen

Federal Standard 595 B-37875 - White Mat Paint Tester Pot

Federal Standard 595 B-37875 - White Mat Paint Colour Swatch

Prices/Coverage

Prices for aerosol cans, tins, tester pots and touch up pens
Format	Size	Coverage	Price
Aerosol Cans
1K	400 ml	1.5 m²	£12.99
2K	400 ml	1.5 m²	£19.99
2K Air Dry	400 ml	1.5 m²	£15.99
Tins
1K	1 litre	10 m²	£39.99
1K	2 litres	20 m²	£59.99
2K Air Dry	1 litre	10 m²	£44.99
2K Air Dry	2 litres	20 m²	£69.99
Tester Pots
1K	60 ml	0.5 m²	£7.99
2K Air Dry	60 ml	0.5 m²	£9.99
1K	100 ml	1 m²	£9.99
2K Air Dry	100 ml	1 m²	£11.99
1K	250 ml	2.5 m²	£14.99
2K Air Dry	250 ml	2.5 m²	£16.99
Touch up Pens
1K	20 ml	0.25 m²	£7.99
2K Air Dry	20 ml	0.25 m²	£9.99

Safety Data Sheets for Aerosols

Product Details

Colour: Federal Standard 595 B-37875 - White Mat

Product type: Custom mixed aerosols, tins & pots.

Brand: One Stop Aerosols

Product Code: 12164

Price: £7.99 – £69.99 + VAT

Availability: In Stock

RGB Colour Code: 227- 229- 218

Hexadecimal Colour Code: #E3E5DA

30-day returns policy on all eligible faulty products.

Trade Application Notes

Federal Standard 595 B-37875 - White Mat sits within our Federal Standard Paint Colour Chart, mixed fresh to order using Lechler binders and colourants. The system is designed so that aerosols and tins can be ordered again later for touch ins, snagging and follow on visits without the colour drifting.

Formats: 400 ml aerosols available in 1K (ready to use) and full 2K, plus our 2K Air Dry option. 2K Air Dry gives you two pack performance that cures in air, at a gentler price point than traditional 2K, which many contractors find ideal for day to day work. We also offer 1 litre tins, touch up pots and touch up pens for detail areas.
Finishes: A choice of matt, satin, semi gloss and full gloss so you can mirror existing schemes or meet a specific client brief and maintenance plan.
Surface preparation: For the most reliable result we recommend degreasing, lightly abrading to a uniform key and carefully removing dust. Please select a primer that suits both the substrate and the environment.
Masking and protection: Nearby glass, brickwork, signage and ground surfaces benefit from simple masking and sheeting. This keeps overspray under control and helps reduce clean up time.
Application control: The vari nozzle cap can be adjusted to a wider or narrower fan pattern. This makes it easier to work up to edges, manage tight areas and keep overspray to a minimum.
Overspray awareness: On external projects it helps to think about wind direction and foot traffic. Temporary screens and a clear working zone make application calmer on live sites.
Weather window: Apply to clean, dry surfaces and avoid conditions where rain or condensation are likely. Please follow the temperature and humidity guidance in the product data sheet.
Recoat and curing: Several lighter coats with the stated flash off time usually give a smoother, more even finish. Allow the coating to fully cure before subjecting it to heavy cleaning or impact.
Working with 2K and 2K Air Dry: These products are for professional use and should be applied with suitable PPE and good ventilation. Mix accurately, respect pot life and dispose of waste materials responsibly. Many users choose 2K Air Dry where they want a two pack upgrade on durability without committing to the cost of full 2K on every job.
Equipment: Aerosols generally behave best when stored at room temperature and shaken thoroughly before use. Tins can be applied using compliant spray equipment or with a fine foam roller and brush for edges.
Coverage and appearance: Light, even passes allow the film to build gradually, helping to avoid runs and dry spray patches and giving a more consistent sheen.
Aftercare: Protect freshly coated surfaces from tape pull, impact and aggressive wash down until the coating has had time to harden. Simple, mild cleaning products are usually enough for routine maintenance.
Repeat orders: Batch details can be recorded so that future top ups are mixed back to the same colour and finish, helping return visits to feel straightforward and predictable.

Used with the correct primer this system can suit many common substrates, including metal, correctly prepared plastics and timber. The aim is a smooth, dependable finish with good adhesion and stable colour under normal service conditions.

Unsure which paint type to pick? The info icons beside Size, Paint Type and Gloss Level give a quick overview, or you can send us a message for a more detailed recommendation.

Customer Reviews

Caitlin S.

★ ★ ★ ★ ★

Edges were crisp with decent masking tape. ...read more

19 Feb 2025

Owen S.

★ ★ ★ ★ ★

Good match to the BS chart. ...read more

22 Jun 2018

Nadia T.

★ ★ ★ ★ ★

Great control on narrow frames. ...read more

23 Dec 2016

Frequently Asked Questions

1K aerosol: typically touch-dry within 15–30 minutes and handle-dry within about 30–60 minutes, depending on film build and conditions.

2K aerosol: often touch-dry in around 40 minutes. Full cure is usually achieved within 24–48 hours, influenced by temperature, humidity and ventilation. Cooler or damp conditions will extend curing time.

As a guide, a 400 ml aerosol will cover up to approximately 2 m² per coat. Actual coverage varies with colour, substrate profile, preparation and application technique.

For best results apply 2 to 4 light coats. The exact number depends on the colour selected, the colour being covered and the substrate. Allow the recommended flash-off between coats.

We strongly recommend using the correct primer for most applications. Choose a primer that suits the substrate, for example glass primers, fibreglass primers and plastic primers. The right primer improves adhesion, coverage and durability.

Please note: our Federal Standard 595 B-37875 - White Mat aerosols, tin & pots are custom mixed and should be test-sprayed on a small, inconspicuous area before full application. We cannot accept responsibility for any colour difference once paint has been applied to your surfaces. If the colour is not accurate, please contact us to arrange a return.